I am new to ARTIQ and am currently setting up our Sinara system according to the ARTIQ manual.
I successfully managed to obtain the device binaries and flash them onto the device, but when I try to ping the device in the command prompt I get a timeout error. The device is currently connected to the PC via ethernet through a network switch but directly connecting it to the PC also doesn't work.
I tried pinging the IP address as reported by the device during startup (monitored using PuTTY), as well as the default IP 192.168.1.75 stated in the manual, both without success. The LED labeled 0 next to the ethernet port is on when plugging in the ethernet cable and the cable itself works fine with other devices. Am I missing something?
Here is the information reported by the device during startup:
| \/ (_) ___| ___ / |
| |\/| | _ \ / _ | |
| | | | |) | () | |
|| |||/ _/ ___|
Copyright (c) 2017-2022 M-Labs Limited
Bootloader CRC passed
Gateware ident 7.8116.eba143a;erlangen
Read leveling scan:
Read leveling: 16+-5 16+-6 done
Memory test passed
Booting from flash...
[ 0.000015s] INFO(runtime): ARTIQ runtime starting...
[ 0.003934s] INFO(runtime): software ident 7.8116.eba143a;erlangen
[ 0.010211s] INFO(runtime): gateware ident 7.8116.eba143a;erlangen
[ 0.016493s] INFO(runtime): log level set to INFO by default
[ 0.022224s] INFO(runtime): UART log level set to INFO by default
[ 0.139032s] WARN(runtime::rtio_clocking): rtio_clock setting not recognised. Falling back to default.
[ 0.147132s] WARN(runtime::rtio_clocking): si5324_ext_ref and ext_ref_frequency compile-time options are deprecated. Please use the rtio_clock coreconfig settings instead.
[ 0.162542s] INFO(runtime::rtio_clocking): using 10MHz reference to make 125MHz RTIO clock with PLL
[ 0.427209s] INFO(board_artiq::si5324): waiting for Si5324 lock...
[ 2.548180s] INFO(board_artiq::si5324): ...locked
[ 2.551811s] INFO(runtime::rtio_clocking::crg): Using internal RTIO clock
[ 2.558969s] INFO(runtime): network addresses: MAC=e8-eb-1b-46-5d-af IPv4=10.34.16.100 IPv6-LL=fe80::eaeb:1bff:fe46:5daf IPv6=no configured address
[ 2.573607s] INFO(runtime::mgmt): management interface active
[ 2.599793s] INFO(runtime::session): accepting network sessions
[ 2.612872s] INFO(runtime::session): running startup kernel
[ 2.617321s] INFO(runtime::session): no startup kernel found
[ 2.623141s] INFO(runtime::session): no connection, starting idle kernel
[ 2.629962s] INFO(runtime::session): no idle kernel found