General

Clarifications regarding the ARTIQ release model and AFWS
- GeneralARTIQ
- ARTIQ follows a rolling release model, with beta, stable, and legacy channels. Different releases are saved as different branches on the M-Labs ARTIQ Git repository, and our s...
3 replies
NAC3 - New ARTIQ Compiler 3: Prealpha release
- GeneralARTIQ
- I am pleased to announce the Prealpha release of NAC3, a new compiler for ARTIQ. It is a major, backward-incompatible rewrite which features improved compilation speeds, a muc...
4 replies
How to use this forum properly
- General
- Please pay attention to: Using the correct tags. If you are asking a question to help you solve a problem, the appropriate tag is probably "Asking for help". Post formatting, ...
2 replies
S
Kasli-SoC RPC Throughput Performance Comparison
- GeneralARTIQ
- We have recently observed performance improvements for certain RPC throughput tests on Kasli-SoC after upgrading the rustc and LLVM versions for the artiq-zynq firmware. The s...
0 replies
R
Alternative Python Execution Approach for Deterministic FPGA Applications?
- GeneralARTIQ
- Hi everyone, I’ve built a Python execution system that runs directly on a softcore processor implemented in FPGA logic. It’s not MicroPython or standard Python-on-Linux — it’s...
2 replies
F
How do users choose folder to save data in?
- GeneralARTIQ
- By default ARTIQ saves data in the "results" subfolder under the working directory that artiq_master is called at. Is there an argument that can be used to change the data sav...
9 replies
P
Help on Nix Manager - package installs
- General
- Hi All, I am running the nix package manager on Ubuntu and trying to build a complete flake.nix. The default inputs.extrapkg.url = "git+https://git.m-labs.hk/M-Labs/artiq-extr...
16 replies
G
Issue with sampler
- GeneralARTIQ
- I installed a new sampler ( v 2.3.1) with one EMM (port 0) in our system which has a master with a kasli soc and 3 satellites with kaslis. I rebuilt all the gateware and flash...
5 replies
P
Kasli-Urukul PLL Instability
- GeneralARTIQ
- Hi, I am trying to provide the clock of the Kasli a 10 MHz clock sourced from GPS and verify that it is working correctly by outputting a frequency from a Urukul at 250 kHz. T...
4 replies
D
ARTIQ 9 on Windows
- GeneralARTIQ
- Are there any Windows users using ARTIQ-9? Is this possible yet via MSYS or has it not been released to Windows as of yet? Is ARTIQ-9 planned to be released on MSYS for Window...
1 reply
J
Are there plans to support Numpy 2.0?
- General
- As the title says, will Artiq move to support Numpy 2.0 in upcoming releases? Numpy support for v1.26.x ends on 17 Sep 2025. More generally does Artiq aim to stay in line with...
6 replies
L
EEPROM aliasing when using DRTIO
- GeneralARTIQSinara
- I have Urukul cards on a master and a satellite. They have synchronization enabled and I am trying to store information in the EEPROM for io_update_delay and sync_delay_seed. ...
22 replies
P
Control Stabilizer from Kasli
- GeneralARTIQSinara
- Has there been any work done on controlling the Stabilizer from the Kasli through the EEM connector? I only see some GPIO definitions in the firmware. How would one implement ...
0 replies
J
Accessing the scheduler using `sipyco`
- GeneralARTIQ
- Hi, We have an issue where our experiment will occasionally hang indefinitely without moving to the next experiment shot. No error is thrown when this happens. I believe it is...
2 replies
M
WRPLL phase noise comparison on standalone Kasli SOC
- General
- WRPLL clock recovery was added in ARTIQ 8, and here's the phase noise comparison between Si5324 and WRPLL on a standalone Kasli SOC: For detail on using WRPLL clock recovery p...
7 replies
P
Stabilizer microcontroller as frequency counter
- GeneralSinara
- I am currently planning a laser frequency offset lock in the MHz regime, for which I would like to use the Stabilizer, building on top of the dual-iir firmware. The STM32H743 ...
7 replies
P
Magneto coil current driver
- GeneralARTIQSinara
- Is there any information on the capabilities of the Sinara Magneto coil current driver? https://github.com/sinara-hw/Magneto In the schematics I only found one note, which sta...
1 reply
L
Shuttler Waveform Generation Test
- GeneralARTIQSinara
- After EFC is installed with Shuttler and establishes DRTIO Link connection with Kasli Master, Shuttler can be controlled to generate a PDQ-based waveform Shuttler is capable o...
1 reply
F
Grabber with NUVU EMCCD camera
- GeneralSinara
- Hi everyone, we want to use a NUVU camera in connection with the sinara grabber and a camera link splitter to control and callibrate the camera with our lab pc. Does anyone ha...
1 reply
G
Scan repository error
- GeneralARTIQ
- When using artiq8, I always encounter this error during the 'scan repository' phase: when scanning the 19th experiment file, the error message appears, and I am unable to retr...
0 replies

Clarifications regarding the ARTIQ release model and AFWS

NAC3 - New ARTIQ Compiler 3: Prealpha release

How to use this forum properly

Kasli-SoC RPC Throughput Performance Comparison

Alternative Python Execution Approach for Deterministic FPGA Applications?

How do users choose folder to save data in?

Help on Nix Manager - package installs

Issue with sampler

Kasli-Urukul PLL Instability

ARTIQ 9 on Windows

Are there plans to support Numpy 2.0?

EEPROM aliasing when using DRTIO

Control Stabilizer from Kasli

Accessing the scheduler using `sipyco`

WRPLL phase noise comparison on standalone Kasli SOC

Stabilizer microcontroller as frequency counter

Magneto coil current driver

Shuttler Waveform Generation Test

Grabber with NUVU EMCCD camera

Scan repository error